Portable Digital Oscilloscope 2-in-1 Multi-function Multimeter
Portable Digital Oscilloscope 2-in-1 Multi-function Multimeter
Couldn't load pickup availability
SPECIFICATIONS
Zener Diode: 0.01 - 24V
Waveform Freeze: Yes (HOLD function)
Vertical Sensitivity: 10mV/Div - 10V/Div (in 1-2-5 increments)
Vertical Displacement: Adjustable, with indication
Triode: YES
Trigger Type: Rising edge, Falling edge
Trigger Mode: Automatic,Regular,Single
Test Voltage Range: 1:1 probe: 80Vpp (±40V),10:1 probe: 800Vpp (±400V)
SCRS,Triac: Turn-on voltage <5V, gate trigger current <6mA
Real-time Sample Rate: 2.5MS/s
PWM Output: Frequency: 0 - 80KHz,Duty cycle: 0-100%,Amplitude: 5.0V,1.5kHz - 9.99MHz
Origin: Mainland China
Operating Temperature: 0 - 40 ℃
Operating Mode: Automatic / Manual
Model Number: FNIRSI DSO-TC2
Measuring Resistance Range: 0.01Ω - 50MΩ
Measuring Inductance Range: 10uH - 1000uH
Measuring Capacitance Range: 25pF - 100mF
Is Smart Device: No
Input voltage: 0.01 - 16V
Input Resistance: 1MΩ
Infrared Remote Control Decoding: NEC protocol infrared code
Horizontal Time Base Range: 10μs/Div - 500s/Div (in 1-2-5 increments)
FET: JFET,IGBT,MOSFET
Display Type: Digital display
Diode: Forward voltage drop <5V
Dimensions: 10cm*8cm*3cm
DS18B20: YES
DIY Supplies: ELECTRICAL
DHT1: YES
DC Voltage: 10:1 probe: 800Vpp (±400V)
DC Current: NO
Coupling: AC/DC
Certification: CE
Brand Name: FNIRSI
Battery: 0.1 - 4.5V
Analog Bandwidth: 0 - 200kHz
AC Voltage: 10:1 probe: 800Vpp (±400V)
AC Current: NO
Introduction:
FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.
FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, press【OK】key to enter component tester mode;Select the “Oscilloscope” item, press【OK】key to enter the oscilloscope mode.
"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.
It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.


